To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.
Features:
Specs:
These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.
Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bars, and the Vortex strips provide shock-absorbing, no-slip cushions for any accessories that rest on them.
Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).
Average Customer Rating: 4.7 out of 5 stars (3270 Customer Reviews)
Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.Easy install, product as described. Customer service was very helpful resolving any issues. Only negative for me was the track hardware was very long other than that everything was spot on.
Paired the Vortex Aero bars with the Rhino base/feet to install on our Retrax XR Pro. The bars are a quality extrusion, that easily fit all of our existing accessories. We mounted 1up USA bike racks and a Yakima box to our Aero bars.
Buying from trailer could not be easier, if you are not confident with the technical details online, their customer service is knowledgeable of the products they sell and are actually in the USA. Terri N has made my recent buys foolproof, from initial ordering to delivery, Terri, communicates throughout the whole process, and always ensure everything I need is included, to prevent follow up orders, that would delay your install.
The two crossbars fit perfect on my 2018 F150 truck bed cover. My tonneau cover comes with two rail tracks. I purchased two sets of Rhino-Rack RTL600 foot system and a T-FK3 RLT600 Track Fit Kit. The crossbars are aerodynamic design and provide higher weight support than Yakima or Thule crossbars with the same length.
The only thing I'm complaining about is the warehouse and shipping time is too long. I ordered this set on early July and waited about 1 month to get the final product. The product is not in stock, somehow, they need to wait a long time from the manufacturer. I understand sometimes the shipping and handling can take a while but a month is way too long. My credit card authorization even expired too. I have to make another order and the representative did help the rest of this issue, return the price difference to me. I'm happy about that.
All in all, I am pleased with the product. But the purchase experience is not as good as I expected. There are many things can change to save the hassle.
Look nicer than the heavier duty squAre Tube bar.
Great quality stuff. Still holds after one year under Texas heat. No issues. And the customer service was top notch. Will buy from them again.
Amazing product!
Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.
Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!
Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!
Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.
The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.
This is the second vehicle now that I've put the Rhino-Rack Aero Bar roof rack kit on. The instructions aren't too hard to follow with basic assembly knowledge and etrailer has a video tutorial for installation instruction which helped also. I didn't realize the allen wrench they provided also doubles as the security bolt bit you'll need when installing the brackets into the tracks so I just picked one up at the local hardware store. It's a great value for this product and I never had issues with my last kit and don't anticipate any with this one.
Look great, and function great. Just make sure you find all the parts packaged inside the rails themselves after you open the box!
While these seem very popular and generally well reviewed ( the reason I tried them) I cant see why, generally cheaply made molded parts with a just adequate fit. Most shocking were the pins that hold the towers and bars down to the base being plastic. Im sure Ill find some use for them but it wont be with my carbon fiber canoe on top, I just dont have the confidence in the connection. While they may be aerodynamic they are definitely not quiet on my installation. The locks can easily be defeated with a screwdriver. At this price I would look at other brands that might have a more positive and secure fit from bar to base. The service from etrailer was its usually quick and correct shipment and delivery though!
Great strength and look. I love em. About to put on the kayak racks and get some fishing going.
Nice rack. Has performed as advertised… I carry canoes and kayaks around in the warmer months, snowboards in the winter, and cargo boxes at various times all year long.
2017 F150 Camper Shell. Nice system and install is pretty simple once you gather your measurements, Luckily, I have a friend with an identical truck, so it didn’t take me very long. I used blue painters take to layout the tracks and drilled my holes. System is nice but does whistle at 70 mph.
UPS destroyed the first rack system that came but etrailer sent a second one very fast. Zero complaints
Very nice rack package. Everything was complete, and install was easy 4/10. I had used another review for the hole spacing, as it was easier. Holes at each end 5/8 in then at 9, 18, 27, 36, 45, 54, for a total of 8 on each rail. I bought the heavy duty set, that’s why there’s 8. The standard has only 6/rail. I marked a centerline on the cap, and put the rails at 36” on center. I used painters tape to be sure they were straight. I also measured , and laid out the holes on the cap and drilled a SINGLE HOLE at the 36” mark. Then verified that the end holes would hit the reinforced portion of my ARE cap. Once that was verified, I drilled the rest of the holes. Because of the camber of the cap, a second person is helpful (holding the rail tight to the cap) when tightening up the nuts from inside the cap. After that, the rest was easy. Just center the rail mounts and lock them in. I would definitely recommend this rack set up, Especially since it was half of what my local Yakima dealer quoted me.
This was installed on a 2016 Silverado, 2500.
Tools used- Tape measure, grease pencil, painters tape, 1/4” drill bit and Cordless drill.
The Rhino Racks Vortex Aero are solid. My first drive with them was to Brighton Utah from Riverside California. They were not only secure throughout the drive and hard winds, they were also reasonably quiet. On top I attached a Thule Force L 628 roof box and it fits perfectly. The only complaints I have are how difficult it was to install the racks to my fixed points. It took several friends, a mechanic, and two days to get everything right.
Product fits the Thule rails on the Leer camper shell on my 2019 Tacoma. Had to remove the back mount end to get the rail nuts on as the rails did not have a slot to fit the nuts in. One nut that attaches the feet to the crossbars was machined wrong but there were enough extra parts to get around the problem. Shipped via USPS which was slow and hard to track. I live in rural Iowa and had to go to town to pick up as the carrier just left a note saying it was at the post office.
Been a year of having and the Product is good ,just make sure to count how many through fasteners that are included. (Or read instructions first and count parts)
The instructions had a measurement as a “drill through” every certain amount of distance note and as it turned out , I had 4 less through fasteners than the measurements alloyed for on my track rails. I happened to find a pack of the fasteners on eBay so it all worked out.
Just learn from my mistake and double check.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.